Special order, raw billet units can be provided (no anodizing on aluminum components). The total height of these units in standard form is approximately 390mm (depending on master cylinder rod adjustment).Ĭustom handles and knobs can be produced upon customer request.
The hex nuts coupled with the master cylinder studs are 316 stainless. For mating the master cylinder to the Main Body, custom 303 stainless studs were turned, as the perfect size is not available off the shelf. The button head fasteners mating the Lower Handle to the Main Body are 18-8 stainless.
Hydraulic handbrake kit series#
The three retaining ring variants used are 400 series stainless. Hardware: All hardware utilized in these handbrakes is stainless. Please contact us if a rod length greater than 3 feet is required. Custom finished rod assemblies can be produced upon customer request. NOTE: If this product is purchased with Polished Linkage Rod, it must be cut and welded by purchaser. This product can be purchased without the stainless tubing and sourced locally by the customer if desired, the threaded inserts are included as standard. This allows any assembly length to be achieved. The Linkage Tube can be cut to any length prior to welding in the inserts. This solution maintains rigidity in the cylinder actuation while ensuring unnecessary weight is not added to the assembly. Push-rod: The linkage Push-rod for this set-up is comprised of two solid-turned 304 Stainless threaded inserts and a cut-to-length thin wall 304 Polished Stainless Tube. The knob options are turned from either white or black Acetal. The handles are CNC machined from 6061-T6 and are finished with a clear anodize treatment. Upper Handle Assembly: The upper handle and knob are both removable and interchangeable. This double shear joint ensures no wear will occur over time. The Mating joint between the master cylinder and the handle consists of a 303 Stainless Steel pin and hardened revolute bushings. The lower joint mating the handle to the body is taken care of by two sealed bearings pressed onto a 303 Stainless Shaft. A surface treatment of clear anodize is applied to finish the lower body. Lower Handle Assembly: The lower handle body is milled from billet 6061-T6 aluminum. Standard and Compact Wilwood master cylinder sizes and variants are available. The master cylinder mating face is cut from T304 then milled to mate perfectly within the Mounting Body. Mounting Bodies: Both Mounting Bodies used in this assembly are CNC laser cut and formed from T304 Stainless Steel.
This allows the Master Cylinder location and brake line routing to be customized. The Remote Mount Handbrake features segregated Actuation Handle and Master Cylinder mounting. Based off the components used in our original Hydraulic Handbrake, this unit was designed and manufactured with no expense spared.
0 kommentar(er)
